FA00526-EN – ver. 3.3.1 – 12/2016
7
Power and control that the SYNC LED lights are flashing on the both circuit
SADRIN TX and SADRIN RX. In the case where only the TX LED is
blinking, check the connections of the synchronism.
Test the barrier interrupting a pair of beams at a time making sure the
ALARM LED is lit.
After test complete program the desired operating mode as reported in the
table below.
Programming has been completed, if desired, turn off the LED with the appropriate jumper and close the
barriers.
FUNCTION
DIP POSITION
DELAY
AND
AND - ON
500ms
FAST - OFF
FAST
AND - OFF
100ms
FAST - ON
NORMAL
AND - OFF
250ms
FAST - OFF
alarm LED ON
me
alarm LED OFF
