s
f 1 6
1
1
f 1 2
1
1 2 3 4
1 2 3 4
1 2 3 4
[ ] OFF
[ ] ON
Page
10
- Manual
FA01357-
EN
- 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
F 12 - Setting the Clock
• Enter the programming, select Setting the
Clock [F12] and then [1].
• They will appear sequentially and flashing ( / to vary,
to confirm):
the year (
2 0 1 6
), the month (
1 2
), the day (
3 1
), the day of the week (
7
);
the time (
2 3
), the minutes (
5 9
), the seconds (
5 9
);
the standard time (
0
winter time/
1
daylight savings time);
the subsequent calibration of the set time (
0
/
1
to activate it).
We suggest that you wait at least one month before checking whether the setting is right.
F 16 -
PIN
• Got to Programming, click on PIN [F16] and then
click on [1].
• The default PIN, 1234, will appear. The first number will be flashing. To change the PIN:
[</>] to change the number;
[ESC] to move to the next digit;
[ENTER] to end and confirm the PIN (at any time).
the display will read [Sto] to confirm that the date has been stored.
F 15 - Store in Rolling Code mode
By default [ ], to add Rolling Code transmitters, you
need to access the control board and run the [U1]
procedure.
By selecting [ ] you can store the transmitters that you
want to add, and use an already stored transmitter as a
key (please, see the transmitter's packaging).
For protection against tampering and unwanted programming.
Page
10
- Manual
FA01357-
EN
- 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructi
ons
