CAME OPP Series, Installation, Operation And Maintenance Manual

Page: 28 / 64

❸
❶
⚠
❷
p.
12
- M
an
u
al
FA
0
1
0
8
6
-E
N
- 0
2
/2
0
18 - © C
A
M
E S
.p.
A
. - "
Tr
an
sl
ate
d o
rig
in
al
in
str
u
cti
on
s"
⚠
DO NOT REMOVE cover 1 without fi rst sliding it.
ESTABLISHING THE LIMIT-SWITCH POINTS
Before establishing the endstop points, you need to: release the gearmotor (see paragraph on manually releasing
it) and remove covers 1 and 2 while carefully following the illustrations.
Open the gate leaf (the grub screws on the mechanical stops are loose) and fi t the pin into the gate bracket.
Fasten using the UNI6593 washer Ø 10 and the supplied UNI 5739 M10 X 10 bolt b .