Page
7
- Manual
FA00768-EN
- ver
.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed subject t
o change at any time and without the need for any advance warning.
Using a Philips screwdriver, remove
the screws from the rear panel.
Installing hard disks on models: MS-N8032-UH - MS-N8064-UH.
Check that the 16 screws in the HDD
bracket are securely tightened.
Fasten the bracket to the device with
the central screw.
Connect the power cable and the data
cable to each hard disk and close the
top panel up again.
Replace the bay in its housing.
