P
age
6
- Manual
FA01648-EN
- 10/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Size
94
426
586
358
58
644
416
Usage limitations
For leaves longer than 2.5 m, install an electric lock.
MODELS
FROG-PM4
FROG-PM6
Gate-leaf length (m)
5.5
4.5
3.5
2.5
7
6
5
4
Gate-leaf weight (Kg)
700
900
1100
1400
550
650
800
1000
Technical data
MODELS
FROG-PM4
FROG-PM6
Power supply (V - 50/60 Hz)
230 AC
230 AC
Motor power supply (V)
230 AC
230 AC
Power (W)
500
500
Capacitor (μF)
16
16
Current draw (mA)
2,1
2,1
Operating temperature (°C)
-20 ÷ +55
-20 ÷ +55
Torque (Nm)
800
800
Opening time at 90° (s)
30
45
Cycles/hour
10
6
Motor thermal protection (°C)
150
150
Protection rating (IP)
67
67
Weight (kg)
38
38
Cable types and minimum thicknesses
Cable length (m)
up to 20
from 20 to 30
Motor power supply 230 V AC
4G x 1.5 mm2
4G x 2.5 mm2
When operating at 230 V and outdoors, use H05RN-F cables compliant with 60245 IEC 57 (IEC); when operating indoors, use H05VV-F cables compliant
with 60227 IEC 53 (IEC). For power supplies up to 48 V, you can use FROR 20-22 II cables compliant with EN 50267-2-1 (CEI).
If the cable lengths differ from those specified in the table, define the cable cross-sections according to the actual power draw of the connected devices
and in line with regulation CEI EN 60204-1.
For multiple, sequential loads along the same line, recalculate the values in the table according to the actual power draw and distances. For information
on connecting products not covered in this manual, please see the documentation accompanying the products themselves.
To connect the encoder, use a FROR 300/500 V shielded cable (3 x 0.5 mm²).
