7
OPERATOR SPECIFICATIONS
This model is intended for use in vehicular swing gate applications:
Gate Classifications:
CLASS I
Main AC Supply:
120 Vac, 50/60Hz
Input Rating:
500 Watts at 120 Vac
Main Supply (Motor):
7.5 Amps at 24 Vdc
Maximum Torque:
320N
Cycle Time:
12 seconds 90 degree @100% speed
Gear ratio:
1/1152
Accessory Power:
24 Vac nominal Class II limited to 37W
Maximum Gate Weight/Length:
880 lbs. at 13 ft.
Maximum Opening:
110 degrees
Daily Cycle Rate AC power:
25 cycles/day
Ambient Temperature:
-20°C to 55°C (-4°F to 131°F)
Fuse Protection Motor:
10 Amp
Fuse Protection Accessories:
2 A
Fuse Protection Control Board:
630 mA-F
Fuse Protection Electrolock:
3.15 A
Fuse Protection Line:
5 A
* The company CAME Cancelli Automatici is ISO 9001:2000 quality certified; it has
also obtained the ISO 14001 environmental safeguarding certification. CAME
engineers and manufactures all of its products in Italy.
This product complies with the following standards: UL-325 and CSA C22.2
NO.247-92.
INTRODUCTION
OPERATOR SPECIFIC CARTON INVENTORY
Control Panel
CARTON INVENTORY
NOT SHOWN:
Hardware and manual
Pillar Bracket
Operator (Gearmotor)
Cover
Side Panel
Side Support -
Power Cable
Side Panel
Side Support -
Transmission Arm
Transmission Arm
Drive Arm
Gate Bracket
Warning Signs (2)