F
GENERAL PRECAUTIONS
Read the instructions carefully before beginning the
installation and carry out the procedures as specifi ed by the
manufacturer. • Installation, programming, commissioning
and maintenance must only be carried out by qualifi ed,
expert technicians and in full compliance with the applicable
law. • Before carrying out any cleaning or maintenance,
disconnect the device from the power supply. • Only use this
product for its intended purpose. Any other use is hazardous.
• Came S.p.A. is not liable for any damage caused by
improper, erroneous or unreasonable use. • Do not obstruct
the ventilation or heat dissipation vents or slots. • Il prodotto
è conforme alle direttive applicabili, vigenti al momento della
fabbricazione.
DESCRIPTION
Intercom internal audio receiver.
Technical data
Type
ED5
Volume
84dB SPL Max (at 1 metre)
Operating Voltage
12-15VDC (13.8V Nominal)
Power
~0.01W Idle, 2.6W Active
Connections
11 Way Screw Terminals
Dimensions
(WxHxD) 96 x 206 x 49mm
(approx. not including
cable)
INSTALLING
Open the device by pressing on the tab at the bottom and
separate the shell from the bottom of the device.
A
Fasten the bottom of the device to the box on the wall.
B C D
Avoid overtightening the screws.
The box must be installed at an appropriate height for
the user.
Once all connections have been made, reattach the shell to the
bottom of the device.
E
HANDSET CONNECTION
F
Control board
①
Terminal block
Preferred colour coding for
wiring handsets
Function
DR
White/Blue
DR 1
Door release
VT
Blue/White
VT 2
12VDC input
0V
White/Orange
0V 3
Common
BZ
Orange/White
BZ 4
Ringtone signal
S2
White/Green
S2 5
Audio from handset
mic.
S1
Green/White
S1 6
Audio to handset spk.
DS
White/Brown
DS 7
Door status LED
CB
-
-
Call back
EX
-
-
External sounder
②
Ringtone volume switch
③
Timer switch
