TITLE
11
commissioning
via panel
Should the transmitter not operate as suggested above,
call CAME helpline
0115 921 0430
for technical support.
add
a transmitter button
1.
Press and hold the
button for 2 seconds to access programming. (
F
1
appears on the display).
2.
Add a transmitter button -
U
1
3.
Choose the function to be assigned to the button
1
= Step-by-step
2
= Sequential
3
= Open
4
= Partial opening
4.
A fl ashing number will now appear on the screen.
5.
Press and release a button on a transmitter, the number on the screen will increment by one for
each button pressed. A maximum of 250 individual buttons can be saved.
remove
a transmitter button
1.
Press and hold the
button for 2 seconds to access programming. (
F
1
appears on the display).
2.
Remove a transmitter button -
U
2
–
O
N
3.
Use the arrow buttons to choose the number associated with the transmitter button you wish to remove.
“
C
L
R
” will appear to confi rm deletion
remove
all transmitters
1.
Press and hold the
button for 2 seconds to access programming. (
F
1
appears on the display).
2.
Remove all transmitters –
U
3
–
O
N
All transmitters will be deleted.
transmitter
radio decoding
1.
Press and hold the
button for 2 seconds to access programming. (
F
1
appears on the display).
2.
Remove a transmitter button –
U
4
3.
Choose the type of radio coding for the transmitters
1
= All decoding (default)
2
= Rolling code
4
= TW key block
Ensure the AF card is fi tted (refer to the wiring diagram).
