4
5),'
352*
²
0
$
352*
>25’’
>25’’
①
①
②
②
5),'
352*
²
0
352*
③
③
beep
beep
<1’’
④
④
M1
PROG
PROG
VA/01
5),'
352*
²
0
352*
⑤
⑤
VA/01
VA/01
VA/01
E
5),'
352*
²
0
$
352*
>25’’
>25’’
①
①
VA/01
②
②
5),'
352*
²
0
352*
VA/01
5),'
352*
²
0
352*
③
③
VA/01
F
Programming
Of an intercom group
Programming the intercom group must be done after assigning the
type of call key or call code to all the internal receivers.
Press the power supply’s PROG key for at least 25 seconds, until the PROG
LED fl ashes quickly
and then put the RFID jumper in position
“+”
.
To enable the intercom function, swipe on the internal receiver that you want
to programme, and press the call button you want to call from: a beep will
sound to show that programming has taken place
.
Continue by repeating the same operations for all the other internal receivers
to be included in the intercom group.
To leave programming, briefl y press the power supply’s PROG key
and put
the RFID PROG jumper in the default position
.
NOTE. If no action is performed, the procedure will automatically end after
30 minutes.
Once an internal receiver has been included in an intercom group by assigning
the call key, it can no longer be excluded from that group.
To change the call key of an internal receiver that has already been pro-
grammed to have the intercom facility, and therefore add new internal re-
ceivers to the group, just repeat the sequence of operations described above.
Deactivating the intercom facility
Press the power supply’s PROG key for at least 25 seconds, until the PROG
LED fl ashes
and then put the RFID PROG jumper in position
“+”
for
at least 20 seconds. At the end of that time, put the RFID PROG jumper in
the default position, to leave programming
.
Connection examples
One group of intercommunicating internal receivers can be programmed
with the VA/01 power supply, following the procedure just described. If you
need to confi gure more than one intercom group VSE/301 devices must be
used. You cannot confi gure one intercom group with VA/01 and others with
VSE/301 at the same time.
KIT FREE DC-DVC 24810380 16-09-14_EN
