P
age
1919
-
Manual code:
119G3265119G3265
ver
.
2
03/2014
© CAME cancelli automatici s.p.a. - The data and information pr
ovided in this manual ar
e subject to change at any time withou
t prior notice by CAME C
ancelli Automatici S.p.a.
ENGLISH
Troubleshooting
PROBLEM
POSSIBLE CAUSES
CHECKS AND REMEDIES
The turnstile remains unlo-
cked in both directions
• No power
• Emergency or release button pressed
• Electric locks out of order
• Check for mains power
• Reset the emergency button or release button
• Contact service
The turnstile unlocks only in
one direction
• One of the electric locks is out of order
• The spring of one of the electric locks has come
unlatched
• Button 2-3 or 2-4 is pressed
• Contact service
• Restore the spring
• Check the contact
The turnstile remains locked • The person going through leaned on the arm too
early.
• Both electric locks remain energised
• The stop button is active
• Ask the person to stand free of the arm and try
unlocking again
• Contact service
• Check the release command validity
The turnstile fails to
slowdown at end run
• The hydraulic damper is out of order
• Adjust the hydraulic damper
The turnstile remains unlo-
cked after passing through it
The entrance/exit sensor is positioned incorrectly
The entrance/exit sensor is out of order
Check the position of the entrance/exit sensor
Contact service
•
Every 400,000 cycles and at least every 6 months:
• Check turnstile internal wiring and verify that there are no
loose or damaged cables.
• Check that there are no abnormal movements and that ro-
tation is smooth by turning the turnstile. Any sudden locking
could be a sign of malfunction.
• Check that turnstile is securely fixed to the ground by trying
to move it; poor ground anchoring could lead to danger.
• Check bolt tightness.
• Check hydraulic damper adjustment.
• Check the efficiency of lock/release levers.
• Linear rail cleaning/lubrication.
• Check roller condition.
•
Each 1,000,000 cycles, replace:
• Rollers and electric locks.
•
Each 3,000,000 cycles, replace:
• Runner springs.
Periodic maintenance
CAME CANCELLI AUTOMATICI S.p.A. implements an EN ISO 14001 certified and compliant Environmental Management System at its
plants, to ensure environmental protection.
Please continue our efforts to protect the environment, something that CAME considers to be one of the foundations in developing its
business and market strategies, simply by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING
Packaging components (cardboard, plastic, etc.) can be disposed of together with normal household waste without any difficulty, by simply
separating the different types of waste and recycling them.
Before proceeding, it is always advisable to check specific regulations in force in the place of installation.
DISPOSE OF PROPERLY!
DISPOSAL OF THE PRODUCT
Our products are made with different materials. Most of them (aluminium, plastic, iron, electrical cables) can be disposed of together with
normal household waste. They can be recycled if collected, sorted and sent to authorised centres.
Other components (control boards, transmitter batteries etc.), on the other hand, may contain pollutants. They should therefore be removed
and handed over to companies authorised to recover and recycle them.
Before proceeding, it is always advisable to check specific regulations in force in the place of disposal.
DISPOSE OF PROPERLY!
DECLARATION OF CONFORMITY
Declaration
- Came Cancelli Automatici S.p.A. declares that this device complies with the essential requirements and other relevant
provisions established in Directives 2006/95/EC and
2014/30/UE
.
A true copy of the declaration of conformity is available upon request.
DISMANTLING AND DISPOSAL
