CAME-TV NANO, User Manual, Page: 20 / 24

Nano with Hub Pairing Instructions
CAME-NANO
**Pairing Steps for Different Group Remotes:**
2 Pairing the Hub M1 group (Remote D/E/F):
- Ensure that both the Hub M1 and all Remote D/E/F are powered on.
- Press and hold the left button on Hub M1 until the blue LED
indicator starts flashing quickly to enter the pairing state.
Simultaneously press the "Volume Up" and "Volume Down" buttons on the
disconnected remote Nano until the LED starts flashing quickly, you will hear
the sound of pairing from the remote. Begin by pairing one remote first, then
proceed to pair the remaining lost remotes one by one in sequence.
- Hub M1 will automatically exit the pairing state, and the LED
will become solid once it is fully connected with 3 remotes
(Remote D/E/F). If there are fewer than 3 remotes, you can
manually exit the pairing state by long-pressing the HUB M1 button.
3 Pairing the Hub M2 group (Remote G/H/I):
- Ensure that both the Hub M2 and all Remote I/H/G are powered on.
- Long-press the Hub M2 button to activate the pairing process.
The procedure is similar to the step above.
19