CAME GROUP bpt brahms XDVA2304, User Manual

Page: 25 / 64

p.
9
- M
an
ua
l c
od
e:
24
80
75
50
v.
1
06
/2
014
Accessing the DVR via WAN
MENU, SETUP NETWORK
Enter IP ADDRESS, SUBNET MASK and GATEWAY.
If using the DHCP, you need to enable it on both the DVR and the ROUTER.
Forward the IP ADDRESS and the port number on the ROUTER's or virtual server's VIRTUAL SERVER. Configure the firewall to permit access to the DVR.
☞
Avoid this step if the UpnP feature is enabled in the DVR and ROUTER.
Open the browser, enter the IP ADDRESS or the dynamic domain name and press ENTER.
⚠
If the http port is not the default one (80), enter the http port after the IP address.
You will need to provide USERNAME and PASSWORD.
Connecting the DVR to the internet via PPPoE
From MENU, SETUP NETWORK, enable PPPoE, then enter USERNAME and PASSWORD. Click APPLY.
The DVR connects to the server and sends a confirmation message.
You can use a dynamic domain name, requesting it from the DNS server that works with the DVR or Router. This dynamic domain name needs to be
added to the DVR or to the Router.
When remotely accessing, entering the IP ADDRESS, will provide direct access.
The ActiveX component is downloaded from the browser.
APPENDIX
Control from remote device
Supported operating systems: WINDOWS MOBILE
SYMBIAN
iOS
ANDROID
BLACKBERRY OS
Supported network: 3G
Tests run on: Dopod D600 (WM5) and Dopod S1 (WM6)
⚠
Enable the network service on the DVR.
WINDOWS MOBILE
Activate the network access on the smartphone and open the browser. Enter the server address. The connection will be created.
Click on the software name (PCam). The DOWNLOAD window will appear. Select YES.
The PCam software will open automatically.