Page 1 of 6
CM-221M
Touchless Exit Switch with Remote LED Triggering
INSTALLATION INSTRUCTIONS
Door Activation Devices
1. GENERAL DESCRIPTION
The CM-221M Hands-Free Switch uses active infra-red
microburst sensor technology, designed for use in ADA
compliant automatic door control applications and access
control.
The CM-221M switches eliminate the spread of germs by
avoiding physical contact, and provide greater convenience
when moving through the premises. The switches are available
with stainless steel faceplates, in narrow (jamb) or single gang.
All models are ROHS compliant with lead-free construction.
Built-in remote LED switching allows for integration with
third-party applications, such as guard and nurse station
annunciators. Adjustable time delay from 0.5 to 20 seconds
and an adjustable range from (2” to 8” / 5cm to 20cm).
2. SPECIFICATIONS
Voltage
12 to 24 VDC +/- 10%
Current
45 mA (peak)
PIR Contact Rating
1 Amp @ 30 VDC
PIR Contacts
Common/ N.O./ N.C.
Temperature Range
14F to 122F (-10 to 50 °C)
Response Time
10ms
Pushbutton
Contact Rating
1 Amp, 30 VDC
Pushbutton
Contacts
Common/N.O./N.C
3. FEATURES
•
Built-in Red and Green LED indication.
Factory default = Red (Standby), Green (Triggered)
•
Red and Green LEDs can be controlled by sensor or
externally
• Adjustable detecting distance: 2 to 8 Inches (5 cm to 20 cm)
• Adjustable Time Delay: 0.5 seconds to 20 seconds
• Toggle function selection available
• IP65 rating
• IR lens to provide stable and reliable operation
4. OPERATION AT A GLANCE
In a typical application, as you approach the CM-221, the LED
will be red. When you wave your hand in front it will change
the LED to green, and trigger its relay to change state and
unlock your door, or trigger the door operator to open the
door. The toggle feature can be used to trigger the door to
remain in the unlocked position, until you wave your hand a
second time to relock it.
PARTS INCLUDED IN THE BOX
• (1) CM-221M Touchless Exit Switch with Manual Override pushbutton
• (1) Parts bag (Contents: (2) 6-32 X 1/2" oval head Phillips ss screws, (2) 6-32 X 1/2" snake eye s/s flat head
screws, (1) Key for tamper proof screws (snake eye), (1) Jumper for factory external LED control)
• (1) User/Installation Manual
• (1) Faceplate Gasket
NOTE: Do NOT use AC Voltage for this unit.
Please see section 8 for power requirements
Dimensions
Narrow:
1 3/4" W x 4 1/2" H x 1 1/4" D
(43 mm x 114 mm x 31 mm)
Single Gang:
2 3/4" W x 4 1/2" H x 1 1/4" D
(70 mm x 114 mm x 31 mm)
