Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
Opening New Doors to
Innovation, Quality and Support!
Page 6 of 6
CM-RQE70A PIR ‘REQUEST TO EXIT’ DETECTOR
INSTALLATION INSTRUCTIONS
6. COVERAGE INFORMATION
The detection area changes depending on the mounting height and
angle of the lens of the REX sensor. If the REX sensor is mounted on the
wall above a door with the lens pointing straight, the detection areas
against the wall are not detected and not shown in the illustrations.
Mounting the REX sensor at higher heights,results.
2 ft.
(0.6m)
11’ 6”
7’5” Ceiling -
Above Single Door
8’ Ceiling - Over the Ceiling
(3.5m)
3 ft.
(0.9m)
12’
(3.6m)
Front View
Bird’s-Eye View
Bird’s-Eye View
Side View
Front View
Side View
in a larger detection area typically. The illustrations show the REX
sensor mounted at 7.5 (2.3m) Feet on a wall with the lens pointing
straight down and at 8 Feet (2.4m) on a ceiling with the lens pointing
straight down.
File: CM-RQE70A Detector Manual.indd-R1
Rev. Label/Date: 1/07-26-17
Part No: 40-82B203-A
