Camco Q-Power 10, User Manual

Page: 23 / 36

5 TROUBLESHOO
TING
USER MANUAL
Q - P O W E R S E R I E S
P. 21
Q - P O W E R
S E R I E S
5.3 Problem: Hiss / Noise
Unplug the amplifi er input to confi rm that the hiss is coming from the
source or from a device upstream. Erratic or popping noises indicate an
electronic fault in the offending unit.
To keep the noise fl oor low, operate the primary signal source at full level
without clipping.
Avoid boosting the signal further between the source and the amplifi er.
5.4 Problem: Squeals and Feedback
Microphone feedback should be eliminated with mixer controls. If noise
continues to build up with no microphone gain, there is a serious fault
in the signal processors or cables. Working in succession from the signal
source towards the amplifi er and check each device in the signal path by
reducing its gain or by unplugging it.