Tecton uses CAMCO’s advanced technologies to deliver
a range of amplifiers, where high audio quality, power
and reliability is of highest priority.
Sonic Integrity
Based on the technology of the renowned Vortex series, the Tecton
series offers excellent sonic integrity, with some of the markets
best audio specifications delivering low distortion and high
dynamic range.
Load & Cost Optimized
The Tecton series is optimized for either high or low impedance
loads. This unique concept allows for complete application focus
reducing unwanted feature and cost. Where specific tools are
required for specific use Tecton delivers it all - even in the most
power demanding venues.
Low Weight – High Reliability
With a weight of just 9,4 kg, the Tecton series is ideal for PA and
Monitor installation in all market sections. CAMCO’s rugged design
and high reliability make the Tecton series a cost effective option
for the discerning user.
Optional Remote Control, DSP & Network
All Tecton amplifiers can be upgraded with CAMCO’s advanced
controller-modules. These offer the possibility for loudspeaker
management, remote control and digital audio network in any
desired combination. The possibility for upgrades makes any
CAMCO amplifier a future-proof investment.
6 Years Warranty
CAMCO amplifiers renowned reliability is backed up by 6 years
warranty from date of first purchase.
TECTON
Series
The 3 position clip limiter provides
accurate protection while main-
taining the maximum power values
possible. If the amp is overdriven,
the clip detection triggers the
Attack Release Circuit (ARC). The
fine structure between fast and
slow modes assures sonic integrity
and maximum protection.
“The features are very good, especially regarding the very com-
plete and well designed protection circuits. Special attention is
deserved by the limiters, which are perfectly tuned to everyday
use with clip- and RMS-character and not only prevent clip-
ping of the power amp, but also offer solid protection for the
connected speakers. The pricing of the Tecton’s is pleasingly
moderate and anyhow you could never go wrong with a Camco
poweramp as an investment and regarding resale value.”
- Tecton test by Production Partner Magazine
The whole PCB-board of the Tecton
amplifier is hanging upside down
inside the chassis. Dust or other
particles that would normally
gather up over time will simply fall
off ensuring long-term reliable per-
formance, even in heavily particle
polluted environments.
The signal section is designed as
an Extended User Interface (EUI)
module. This EUI can be replaced
with upgrades such as integrated
controller-DSP, remote control &
digital audio network. This con-
cept ensures CAMCO amplifier as
a future proof investment that can
take advantage of current as well
as future available upgrades.
