1
WEL
C
OME
USER MANUAL
TECTON POWER AMP SERIES
P.8
USER MANUAL
TECTON POWER AMP SERIES
P.9
1.3 The Amplifier
The
TECTON
is a Class-H power amplifier with a power output of:
TECTON 38.4
1900 W per channel @ 4
Ω
3800 W in Mono-Bridge @ 8
Ω
3800 W in Parallel-Mono @ 2
Ω
TECTON 32.4
1600 W per channel @ 4
Ω
3200 W in Mono-Bridge @ 8
Ω
3200 W in Parallel-Mono @ 2
Ω
TECTON 24.4
1200 W per channel @ 4
Ω
2400 W in Mono-Bridge @ 8
Ω
2400 W in Parallel-Mono @ 2
Ω
TECTON 28.2
1420 W per channel @ 2
Ω
2840 W in Mono-Bridge @ 4
Ω
2840 W in Parallel-Mono @ 1
Ω
TECTON 22.2
1140 W per channel @ 2
Ω
2280 W in Mono-Bridge @ 4
Ω
2280 W in Parallel-Mono @ 1
Ω
TECTON 14.2
730 W per channel @ 2
Ω
1460 W in Mono-Bridge @ 4
Ω
1460 W in Parallel-Mono @ 1
Ω
TECTON
amplifiers are fitted with Switched Mode Power Supplies (SMPS), which
significantly reduces the weight and size (only 2U) of the amplifier. Using SMPS,
the 2 symmetrical supply voltages (1 symmetrical supply voltage for
TECTON
22.2
and
TECTON 14.2
) of the power amplifier are more stable than the power
supplies used in conventional amplifiers.
The
TECTON
has been designed as an intelligent and powerful product for
performing specialised tasks within a complex audio system. Users can adapt
the power amp to meet their specific audio requirements before use. Controls
mounted on the front and the rear of the
TECTON
allow access to the functio-
nality.
Since some of the externally mounted controls have multiple functions, it is
important that users should familiarise themselves thoroughly with the entire
range of controls.
If you have any questions regarding features and/or functions of your
TECTON,
CAMCO
will be pleased to provide you with further information. Alternatively,
contact your dealer or distributor.