background image

Section I - Merchandising Display Instructions

Section II - Cleaning and Maintenance

Parts List

A.

  1 - Merchandising Sign Holder 36" W x 9

1

/

4

" H (91,4 x 23,5 cm)

B. 

4 each - 

1

/

2

" Nylon Thumbscrews

C. 

4 each - 

1

/

4

" Fender Washers

Installation

1�  Remove the Merchandising Sign Holder from the original packaging�
2�  Carefully position the sign holder sideways�
3�  Position the selected merchandising sign(s) into the sign holder� Signage space 

available is 36"W x 8

1

/

2

"H (91,4 x 21,6 cm)� Sign thickness should be less than  

1

/

16

" (2 mm) to fit properly into the sign holder� 

4�  Fold-in the sneeze guards and drop down the tray rail of the Food Bar� Do not 

stand or lean against the Food Bar sneeze guard or tray rails� 

5�  Remove the four nylon button plugs from the screw holes in the top shelf�
6�  Place the sign holder in the middle of the top shelf of the Food Bar aligning the 

four screw holes in the sign holder with the four screw holes in the top shelf�

7�  Secure the sign holder to the top shelf of the Versa Bar by placing a washer over 

each hole in the sign then tightening the four nylon thumbscrews over each 
washer� Do not over-tighten as that could strip the thumbscrew threads�

Cleaning Instructions

Clean with a mild, non-abrasive detergent and warm water� Clean then wipe dry with soft cloth or soft paper towel� Warning: Do not use window cleaner, 
ammonia based cleaners, kitchen scouring compounds, cleaning solvents such as acetone, bleach benzene, carbon tetrachloride or thinners�  
These chemicals will damage the display holder�

© 2009 Cambro Manufacturing Company, 5801 Skylab Road, Huntington Beach, CA 92647-2056 
714 848 1555 / Toll Free 800 854 7631 / FAX 714 842 3430 / Customer Service 800-833-3003
UMVBRSH0908 

Printed in USA  06/09 

REV 0709

D070909_VB MerchSgn _MN

Section IV – Warranty

Section V – Replacement Parts

CAMBRO WARRANTY AND PRODUCT LIABILITY 

Cambro warrants to the original buyer that if a product proves defective: 
1� Within 1 year from the date of manufacture, Cambro will replace the product free of charge; or, 
2� After 1 year and up to 2 years from the date of manufacture, Cambro will grant a credit of 2/3 off replacement product; or, 
3� After 2 years and up to 3 years from the date of manufacture, Cambro will grant a credit of 1/3 of the original price towards a replacement product�

Please visit www�cambro�com for a complete list of replacement parts or contact your local Cambro Representative or Distributor�

Reviews: