MC14-2.4A
Page 16 of 20
This is because an application has control over the COM port that the hub is connected to and
no subsequent application can access the hub. To resolve this you will need to close any
applications that control the COM port before opening another.
6.4. No GUI
If you are using a headless system with no GUI then and you require to enable logging for
support issues you can use the following command to create the logging cfg file manually:
echo *=DEBUG>/etc/opt/cambrionix/cambrionix.log.cfg
Then after re-producing the problem, you can zip the logs from the folder
/var/log/cambrionix
You may delete the file below when you are finished with it.
/etc/opt/cambrionix/cambrionix.log.cfg
