background image

C A M B R I D G E   S O U N D   M A N A G E M E N T

14

WARRANTy:

Note: This equipment has been tested and found to comply with 

the limits for a Class A digital device, pursuant to part 15 of the 

FCC  Rules. These limits are designed to provide reasonable 

protection  against harmful interference when the equipment 

is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause 

harmful interference in which case the user will be required to 

correct the interference at his own expense.

Modifications not expressly approved by the manufacturer could 

void the user’s authority to operated the equipment under FCC 

rules.

Warranty Coverage — Qt Emitters™

 

Cambridge Sound Management, LLC (the “warrantor”) will, for 

a period of five (5) years, starting with the date of purchase, 

warrant that the Qt Emitters™ (the “speakers”) will be free of 

defects in materials and workmanship that interfere with proper 

operation as a sound masking, paging and music speaker system. 

During that period, the warrantor will, at its option, either (a) 

repair the speaker, or (b) replace the speaker. The decision to 

repair or replace will be made by the warrantor.

Warranty Coverage — Qt control unit 

The warrantor will, for a period of one (1) year, starting with the 

date of purchase, warrant that the Qt control unit (the “system”) 

will be free of defects in materials and workmanship that 

interfere with its proper operation as a sound masking, paging 

and music distribution control system. During that period, the 

warrantor will, at its option, either (a) repair the system, with 

new or refurbished parts, or (b) replace the system with a new 

or refurbished system of equal functionality at no charge. The 

decision to repair or replace will be made by the warrantor.

All software installed in the Qt system is warranted to 

substantially conform to its published specifications. In no event 

does the warrantor warrant that the software is error free or 

that the customer will be able to operate the software without 

problems or interruptions. The warrantor will, from time to time, 

make available software bug fixes. It is the responsibility of the 

purchaser to download and install these software modifications. 

Except for the forgoing, all software and software upgrades are 

provided AS IS.

The following terms apply to all

These warranty terms are extended only to the original purchaser of a 

new  product. A purchase order or other proof of the original purchase 

date and purchaser is required for warranty service. 

Summary of Contents for Qt 100

















Reviews: