5
AX
C25
AX
C35
Rear panel connections
Front panel controls
Cambridge Audio is a brand of
Audio Partnership Plc
Registered office:
Gallery Court, Hankey Place
London SE1 4BB, United Kingdom
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
Power AC
Digital Output
Digital Output
S/P DIF
Co-axial
Designed & Engineered in Great Britain
Assembled in China
Power Rating
:
100–240V AC ~ 50/60Hz
Rated Power Consumption: 15W
Line Output
Line Output
L
L
R
R
AXC35
Compact Disc Player
1
2
3
1
S/P DIF CO-AXIAL DIGITAL OUTPUT (AXC35 ONLY)
For input to a separate DAC or digital recording machine. To obtain best results, use
a high quality 75ohm digital RCA interconnect cable (not one designed for normal
audio use).
1
POWER BUTTON
Switches the unit between Standby mode (indicated by dim power LED) and On
(indicated by bright power LED). Standby mode is a low power mode where the
power consumption is less than 0.5 Watts. This product has APD (Auto Power Down)
enabled as default. After inactivity of 20 minutes, the product will automatically
switch to Standby.
Auto Power Down (APD)
You can enable and disable the units APD setting. This can be adjusted by pressing
and holding the Power button until the LED flashes in sequence.
The two options below show which option is selected.
Standby flashes 5 times - APD disabled
Standby flashes 10 times - APD enabled
Note:
Make sure the unit is On, before making changes to the APD function.
2
INFRARED SENSOR
Receives IR commands from the supplied remote control. An unobstructed line of
sight between the remote control and the sensor is required.
2
LINE OUTPUT
Use good quality interconnect cables from these sockets to any line level input
on your amplifier. For best results and matched performance, we recommend
connection to a Cambridge Audio amplifier.
3
AC POWER CABLE
Once you have completed all connections to the amplifier, plug the AC power cable
into an appropriate mains socket and turn the unit on. Your compact disc player is
now ready for use.
C35
AX
3
DISPLAY
Alpha-numeric characters which display playback information. On inserting a disc,
the CD player will take a few seconds to read the Table of Contents (TOC) information
from the disc. The display will then show the number of tracks on the CD and the
total length of the CD.
4
OPEN/CLOSE
Allows you to open and close the disc tray. After placing a CD in the tray, press Open/
Close to close the tray.
5
PLAY/PAUSE
Plays the disc and pauses play.
6
STOP
Stops the CD playing.
7
SKIP/SCAN
Enables you to skip between and search within tracks. Press briefly to skip a track.
Press and hold to scan through a track.
1
3
2
4
5
6
7
