Pair & Connect -- Step 1
Page 10
- Make sure your OontZ Angle 3 battery has a sufficient charge, it is not able to connect when the charge is too low.
- Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 to pair and connect. If there is an
issue when connecting please move your device closer to the speaker, then pair and connect.
Turn ON your OontZ Angle 3
Flashing Blue Light
- The OontZ Angle 3 is ready to pair and connect.
Solid Blue Light
- The OontZ Angle 3 has automatically reconnected to the last device it was connected to
and is ready to play.
- The OontZ Angle 3 will automatically try to connect to the last device it was connected to each
time it is turned on and that device is within range.*
The OontZ Angle 3 can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired
device.
- To disconnect the current device, press and hold down the
Bluetooth button for 3 seconds.
- The
Blue Light will begin flashing and the OontZ Angle 3 is ready to pair and connect to your device.
*Exception: certain devices may not automatically reconnect.
Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"
