Select the Menu in the upper left hand corner of the app and select ‘Surround Mode’ from the menu.
– Turn on
one
of OontZ Angle 3 ULTRA speakers.
– Connect the speaker to your device or connect a 3.5mm audio cable to the Aux In of the speaker. When connected the Bluetooth Light
will be lit Solid Blue or Solid Green if using Aux In. This speaker will serve as the
Master Speaker.
– Turn on the
other
OontZ Angle 3 ULTRA speakers. These speakers will be the
Slave Speakers
.
– The Slave speakers must not be connected to any device, their Bluetooth Light must be flashing Blue. If a speaker has a solid Blue
Light it is connected to a device and you need to disconnect it by pressing and holding down the Bluetooth Button for 3 seconds until
the Bluetooth Light begins flashing Blue.
Page 29
Using the OontZ app for Surround Mode
The ‘Master Speaker’ menu will be displayed
and the speaker connected to your iPhone
or Smartphone will be displayed.
The first time entering Surround Mode the
speaker connected with your device will
automatically be selected and the box will
turn from Grey to Blue.
The light above the Play/Pause Button on the
Master Speaker will turn solid Orange and the
speaker will announce “Surround Mode Transmit”.
This speaker will serve as the Master Speaker.
If the Master Speaker has exited Surround Mode.
Surround Mode can be enabled again by selecting
the Grey box of the Master Speaker. The box will
turn from Grey to Blue.
Connecting 2, 3 or 4 OontZ Angle 3 ULTRA speakers together