9
9
9
After you have positioned the subwoofer enclosure,
to connect the Control Module to your audio
components.
About your audio components:
You can connect the
Control Module to a
receiver, an integrated amplifier, a
preamplifier/power amplifier combination or other
audio component with line level or speaker level out-
puts. For brevity, this guide will usually refer only to a
“receiver,” but the instructions will also apply to any
audio component.
You can connect the Control Module to a receiver’s line
level output (one or two RCA jacks) or its speaker level
outputs, but not both. Always disconnect the AC
power to the Control Module and the subwoofer enclo-
sure before making or changing any connections.
Line Level Connections
For most line level connections, you need a signal
cable with an RCA plug at both ends. Connect the
Control Module in the following ways:
Dolby Digital receiver:
Connect a mono signal cable
from the RCA jack output labeled
SUB OUT
(or possi-
bly labeled LFE or just SUB) on the receiver to the
SUB IN
input on the Control Module.
Dolby Surround receiver
(with or without Pro Logic):
Connect a signal cable from the
SUB OUT
RCA jack
(also labeled
LINE OUT
,
AUDIO OUT
, or just
SUB
) to
the
SUB IN
input on the Control Module.
Preamplifier/power amplifier:
Connect a stereo sig-
nal cable with RCA plugs at each end from the
LEFT
and
RIGHT
preamp outputs to the
RIGHT IN
and
LEFT IN
inputs on the Control Module. Connect
another stereo signal cable from the
RIGHT HIGH-
PASS OUT
and
LEFT HIGH-PASS OUT
outputs of
the Control Module to the
LEFT
and
RIGHT
inputs on
your stereo power amplifier (or the
FRONT LEFT
and
FRONT RIGHT
inputs of a multi-channel power
amplifier.)
Once your line-level connection is made between the
receiver and Control Module, skip to “Connect the
Subwoofer Enclosure,” page 11.
CONNECTIONS
RIGHT IN
LEFT IN
CENTER IN
PREAMP LEVEL INPUTS
RIGHT
HIGH PASS
OUT
SUB IN
LEFT
HIGH PASS
OUT
+
–
+
–
+
–
RIGHT
CENTER
LEFT
SPEAKER LEVEL INPUTS
1
2
INTERFACE JACKS
ON
AUTO
OFF
12V
AC INPUT
00000000
Newton, Massachusetts USA
Made in China
CONTROL MODULE
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
INPUTS
IN
R
L
CD
INPUTS
OUTPUTS
AUX
TAPE
OUT
OUT
IN
IN
IN
IN
TAPE
R
L
IN
R
L
POWER
AMPLIFIER
PREAMP
RIGHT IN
LEFT IN
CENTER IN
PREAMP LEVEL INPUTS
RIGHT
HIGH PASS
OUT
SUB IN
LEFT
HIGH PASS
OUT
+
–
+
–
+
–
RIGHT
CENTER
LEFT
SPEAKER LEVEL INPUTS
1
2
INTERFACE JACKS
ON
AUTO
OFF
12V
AC INPUT
Newton, Massachusetts USA
Made in China
CONTROL MODULE
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
COAX
SUB OUT
DIGITAL INPUTS
MAIN RIGHT
MAIN LEFT
CENTER
REAR RIGHT
REAR RIGHT
SPEAKER OUTPUTS
SIGNAL CABLE
WITH RCA PLUGS
RECEIVER
OPTICAL
Dolby Digital and Dolby Surround receiver
Line level connector
Preamplifier/Power amplifier level connectors
This jack is usually labeled "SUB OUT," but it may
say "SUBWOOFER" or "LFE OUTPUT". Check
the receiver owner's manual to identify it.