Using Your MovieWorks HD 12
Turning on MovieWorks HD or enabling Standby mode
Press the Power/Standby button
on your remote control to turn on
MovieWorks HD or enable Standby mode. For Power/Standby LED
information, see “Understanding the Power/Standby LED” below.
Returning to factory default settings
Press and hold the Power/Standby button on your MovieWorks HD while you
connect the power jack or plug the power adapter to the power outlet. The
Power/Standby LED changes from red to white and remains lighted up in
white. During a reset, MovieWorks HD reverts to the original volume setting,
and turns on the X-Fi enhancements to default levels. If your MovieWorks
HD is paired with any Creative Wireless Receiver, the zone control settings
are also erased.
Understanding the Power/Standby LED
NOTE
You can also press the Power/Standby button/LED
on MovieWorks
HD.
LED
Behavior
Status
White
Stable
Turned on and ready for use
Red
Stable
In Standby mode
Stable (Red) -> Stable (White)
Establishing wireless connection
Quick flashing (twice)
Receiving remote control signals
Continuous slow flashing
Muted
NOTES
For information on the Link LED, see the Creative Wireless
Receiver User’s Guide.
