8
Radio Mode (AM/FM)
Radio Mode recieves analog radio from the AM or FM
band and displays Radio Data System (RDS)
information about the station and show being
broadcast.
Before entering Radio mode, connect both the AM and
FM aerials to their respective Antenna connector at the
rear of the radio and fully extend the aerial.
From the main menu, tap:
You’ll see the following screen, with your last selected
AM or FM frequency displayed.
Navigating Radio Stations
You can use the frequency scale across the center of
the screen to search for radio stations. Simply tap any
part of this scale to tune the radio to the corresponding
radio frequency.
The following actions are available on this screen.
For stations with good signal strength which broadcast
RDS (Radio Data System) information, the screen will
display the RDS data.
Favorite Station Presets
You can store up to 10 favorite station presets in Radio
Mode.
Select the AM radio frequency band.
Select the FM radio frequency band.
Tune the radio frequency up one step at a
time.
Tune the radio frequency down one step at
a time.
Scan up the radio frequency till the next
available station is found.
Scan down the radio frequency till the
next available station is found.
Add the station you’re listening to as a
new favorite. Select a slot in your
Favorites list to save to. If there is an
existing favorite in the slot you selected, it
will be replaced automatically.
Review your Favorites list. Select the
favorite station you want by tapping the
corresponding slot.
CSW Ambiance Touch Radio_EN.fm Page 8 Friday, July 8, 2011 5:18 PM
Summary of Contents for CW0380
Page 1: ......
