Attaching Light Curtains
One light curtain is installed on the strike wall and the other one is installed on the fast door.
Remove the supplied bracket from the light curtain tube, install on the light curtain with the
hardware found inside tube, loosen the 5/16-inch bolts on the strike wall and slide bracket over
bolts and tighten. Take the other light curtain and place over the fast door, mark hole locations
and drill holes to secure in place with the remaining hardware.
Handrail
Procedure:
•
Determine the mounting height and location
•
To center the handrail on a wall (
see image below
)
o
Measure the width of the wall, this will be called measurement X
o
Measure the distance between the mounting holes on the handrail, this will be
called measurement Y
o
The distance from the wall to the first mounting hole will be (X-Y) divided by 2,
this will be called measurement Z
o
At the mounting height, measure from the left wall over measurement Z, and
mark the location of the left mounting hole
o
At the mounting height, measure from the right wall over measurement Z, and
mark the location of the right mounting hole
o
Confirm the locations marked line up with the handrail mounting points, by
holding up the handrail to the wall
•
Drill a half inch hole at each location
•
Remove the standoffs from the handrail using a 1/8-inch allen key
•
Follow the instructions inside the mounting hardware package to attach the standoffs to
the wall
Note
: Be sure that the allen keys are facing down
•
Place the handrail over the standoffs and tighten the allen keys
Summary of Contents for JOURNEY LA
