Cambridge Elevating Elmira, Design Manual

Page: 5 / 21

www.CambridgeElevating.com August 2017
5
Description of Elevator Equipment
General

Rated load: Up to 1,500 lbs. where permitted
by local codes

Nominal speed: 40 feet per minute

Elmira minimum pit depth: 8”

Elmira minimum overhead clearance: 96”

Heritage/Cambrian minimum pit depth: 12”

Heritage/Cambrian minimum overhead: 108”

Maximum travel: 50 feet

Maximum number of stops: 6
Mechanical Equipment

220 VAC, 60 Hz, 30 Amp single phase power

Dual 8 lb. modular T-rail system

Two 3/8” diameter, 17 x 9 wire ropes

Sling assembly

Forged rope sockets

2:1 roped hydraulic single stage cylinder
 Submersed electric motor with 2-speed
adjustable valve system
Cab and Appointments

Car size: Up to 20 sq. ft. standard

Cab height: 84" standard, 96" & custom optional

Recessed LED cab lights – 2 or 4 lights depending
on cab size

Interior cab walls and ceiling finish, choice of:
Melamine : cherry, oak, maple, walnut, white , black
Veneer (unfinished) –birch, cherry, maple, oak,
walnut
(MDF) Medium density fibreboard – paint grade

Rough plywood cab floor with ¾” recess
Gates and Doors

Elmira
Swing door for each landing
Horizontally collapsible accordion style car gate(s)

Heritage
Swing door for each landing
Automatic sliding cab door panels ( beige or s/s)

Cambrian
Automatic sliding cab door panels (beige or s/s)
Automatic sliding landing door panels (beige or s/s)
Controls

Microprocessor controller with relays for basic
operation

Fully automatic operation

Automatic timed cab lighting

Stainless steel car operating panel (COP),
telephone box and hall call stations

Dual illuminated hall call station push buttons
and position indicating push buttons on COP

Emergency stop switch on COP

LED/dot matrix Digital Position Indicator (DPI)
in car
Safety Devices

Stainless steel handrail inside cab

220 VAC lockable disconnect for p ower unit

Final limit switch

Slack rope safety switch

Pit stop switch

Car top stop switch

Line rupture valve

Low pressure switch

Automatic leveling (anti-creep)

Emergency battery lowering

Electro-mechanical door interlocks

Manual lowering device

Telephone in cab
Options

Custom cab sizes/heights. Oversized cabs
where permitted (variance may be required)

Unfinished oak, maple or cherry solid
hardwood / face frame hardwood cab walls and
ceiling

Stainless steel patterned cab walls and ceiling

Custom finish elevator fixtures (COP, telephone
box and hall call stations) in choice of plating
finishes: Brushed brass, oil rubbed bronze,
polished stainless, brushed nickel, consult
factory for additional choices.

Two piece hydraulic jack

Additional handrails in cab

Handrail COP (all models)

LED/dot matrix Digital Position Indicator (DPI)
hall call stations on landings

Veneer and decorative metal wrapped sliding
door panels (Heritage/Cambrian)