Cambridge Casual CC-320617, Assembly Instructions Manual

Page: 3 / 6

2
METAL PIN
FOLDABLE LEAVES
E
D
G
F
OUTER UMBRELLA HOLE
UMBRELLA HOLE COVER
- Put the table (A) face down on a flat non-abrasive surface.
- Attach the leg frames (B) into table top (A) and secure using washers (G), spring washers (F) and
2 3/4" bolts (D) as diagram shown.
** DO NOT TIGHTEN ALL BOLTS YET.
- Next, attach the cross bar (C) into pre-assembled leg frames (B) and insert 1 1/2" bolts (E) into
predrilled holes as shown.
- Make sure all parts are correctly connected and tighten all bolts completely using allen wrench.
- Turn the table upright.
E
C
B
B
A
STEP 1
STEP 2
To extend :
- Pull the table top from each end.
- Unfold the leaves.
- Push both ends of table top together. Make sure metal pins
are matched with holes as diagram shown.
STEP 3
Put the umbrella hole plug (H) into hole of table top (A) as diagram shown.
H
ASSEMBLY INSTRUCTIONS