Cambridge Audio AZUR 651T User Manual Download Page 6

Select/Mode

FM mode

- Press and hold to toggle Radio mode ‘Ster/Mono’.

DAB mode

- Press and hold to toggle Auto Select ‘On/Off’.

When Auto Select On, if you browse to a station in the display (using 

and 

)  and  then  nothing  is  pressed  for  a  few  seconds  the  651T  will

automatically tune to that station.
When Auto Select Off, you need to press Select after browsing to a station

to tune to that station (if nothing is pressed for a few seconds the display

reverts to the current station).

(Skip/Scan)

DAB mode

- Press to browse/tune through available stations. 

AM/FM mode

- Press to move the frequency in .05MHz steps up or down.

Press and hold to scan up or down to the next strong station. 

Note:

Also used for Clock/Alarm/Sleep/Menu settings and manual tuning

in DAB mode.

6

Front panel controls

1

2

3

4

7

5

6

Standby/On

Switches the unit between Standby mode (indicated by dim power LED)

and On (indicated by bright power LED). Standby is an eco power mode

where the power consumption is less than one watt. 

Note:

Press the Info button to briefly display the current time and date.

Presets

The 651T can store up to 20 Presets for each of the DAB, FM and AM

bands. All 20 per band are available from the remote control, while 10 per

band are available from the front panel. The Shift button alternates the 5

buttons between accessing or storing Presets 1-5 and 6-10. 
Press  and  hold  the  appropriate  button  to  store  the  presets.  Press  the

appropriate  button  to  access  the  stored  presets.  See  later  sections  for

more information.

Note:

When the Shift button on the front is pressed to access or store

Presets 6-10, the unit will revert to Presets 1-5 afterwards.

Band

This button switches between the AM, FM or DAB bands as appropriate.

Autotune

DAB mode

- Because DAB stations are transmitted in digital multiplexes

containing several stations bundled together the 651T needs to scan and

find the available multiplexes in your area before it can allow you to step

through  the  stations  they  contain.  The  quick  scan  scans  all  the  most

common bands for multiplexes, whilst the full scan will scan all possible DAB

frequencies and may take up to a couple of minutes to complete. Press once

for a quick scan through the receivable stations, or press and hold for a full

scan. The stations found will be displayed in alphabetical order.

AM/FM mode

- Press once to scan up to the next available station. Press

and hold to scan down.

Note:

Scanning is also possible by pressing and holding the 

or 

buttons.

Info

Press to select and view different information on the front panel display.

The display modes are:

DAB  mode

-  Radio  Text,  Program  Type,  Transmission  Group,  Signal

Strength, Date/Time, NCT mode, Frequency Info, Bitrate, Alarm and Sleep.
Press and hold to initiate manual tuning in DAB mode. Press and hold to

exit manual tuning mode. See later section for more information.

FM mode

- Program Type, Radio Text, Frequency, Signal Strength, Stereo

mode, NCT mode, Date/Time, Alarm and Sleep.

AM mode

- Time/Date, Alarm, Sleep and NCT mode.

Standby mode

- Press to display the Time and Date for a few seconds.

1

2

6

5

4

3

7

Summary of Contents for AZUR 651T













Reviews: