Cambridge Audio 840A Class XD White Paper Download | Manualshive

Page: 18 / 23

background image

White paper

Fig 12 showing crossover displacement against class B.

Looking at push-pull crossover displacement, Fig 12 shows that push-pull crossover displacement

(XD PP) gives much lower distortion than constant-current crossover displacement. (XD CONST)

tested at 10 kHz, power as before. The transition points can also be seen to be not quite the

same (-8 dB for push-pull versus -11 dB for constant-current). The salient point is that at -2 dB,

THD is very significantly lowered from 0.0036% to 0.0022% by the use of the push-pull method,

which reduces the magnitude of the current changes in the output transistors of the main amplifier.

In fact THD is lower at all points than both Class B and Constant Current Class XD.

«
...
16
17
18
19
20
...
»

Summary of Contents for 840A Class XD
























Reviews:

No comments

Related manuals for 840A Class XD

Brand: zapco Pages: 71

Brand: TC Electronic Pages: 45

PowerLight PL325

Brand: QSC Pages: 12

Brand: Parasound Pages: 20

Brand: Primare Pages: 10

Brand: Aesthetix Pages: 11

Brand: Focal Pages: 8

Brand: M2TECH Pages: 37

Brand: Pyle Pro Pages: 13

Brand: Roswell Pages: 20

Brand: icon Audio Pages: 10

Brand: Peavey Pages: 50

Brand: Harman Kardon Pages: 28

Brand: K-array Pages: 24

Brand: Adcom Pages: 9

Brand: Cary Audio Design Pages: 31

Brand: SensaSound Pages: 15

Brand: Tektronix Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands