5
2. Lens mount
Before mounting the lens to the WRS-HVSA please check if the lens shutter
mechanism is cocked, similar to mounting lenses to a Hasselblad body. You can
cock the shutter by using a flat srew driver to rotate the slotted part in the
direction indicated on the lens if neccessary.
The WRS-HVSA must also be cocked by pulling the cocking lever towards the
cable release. To mount the lens to the WRS-HVSA, place the red triangle mark
on the lens in front of the red dot on the WRS-HVSA and mount the lens to the
adapter by rotating it clockwise until you hear a click.
Figure 2. Tension the lens and WRS-HVSA
Summary of Contents for WRS-HVSA
Page 2: ...2 ...
