10
7. Adjusting the PCF friction
It is possible to fine tune the PCF manual control friction to your own
preference. Note that fine tuning the PCF friction is a precise task and
should be performed with great care to prevent damages or
malfunctioning.
Fine tuning the manual friction:
Figure 5 PCF manual friction adjustment
1.
Rotate locking knobs [D] and [H] CCW until they come off the
threaded axis.
2.
Use an 8mm wrench to turn the M5 locking nut CW to apply
more friction or CCW to apply less friction.
3.
Re-apply locking knobs [D] and [H] by rotating them CW over
the threaded axis.
Summary of Contents for PCF
Page 2: ...2 ...
