Instruction Manual
Dual 15mm Rod Follow Focus Unit
1
CSMFC-22
Dual 15mm Rod Follow Focus Unit
INSTRUCTION MANUAL
EN
Please read
this manual
carefully before
using the Cambo CSMFC-22!
CAUTION
Please be careful when using the CSMFC-22 follow focus on lenses with a stiff/rigid
turning focus ring. In this particular case excessive force on the focus knob could lead
to damaging the internal gear drive of the CSMFC-22 unit.
A
Focus Gear M0.8 45 teeth (standard)
J
Hex bold (M4x10 DIN912) to fix the clamp arm
B
Mounting hole clamp arm
K
Spring washer (4 DIN7980)
C
Gear flange
L
Gear lock
D
Adjustable clamp arm
M
Locking knob hard-stop
E
Clamp knob (adjustable clamp arm)
N
Hard-stop indicator
F
Accessory mount (star knob/speed crank/whip)
O
Blocking switch
G
Focus knob
P
Locking knob 15mm dual rod clamp
H
Marking scale
Q
Dual 15mm rod clamp
I
Focus housing
►
Changing the focus gear
To change the focus gear
(A)
please unscrew the “gear lock”
(L)
counter clockwise. When the gear lock is loosened
the gear can slide off the gear flange
(C)
. The focus gear can be positioned left or right side of the housing.
When using the CSMFC-22 on lenses with the focus ring near to the camera body, its advisable to use the gear on
the side closed to the camera.
►
Changing marking scale
The scale
(H)
uses magnetic fixation. To take off the scale, please grasp both sides and pull off the scale. For
mounting; slide the scale over the focus knob and align the notch with the blocking switch
(O)
until is snaps into place.
It’s advised to use a pencil or standard fineliner for setting the marks. Don’t use permanent marking pens for setting
the marks. The marking scales are also sold separately as a spare item.