6
5. Adjusting the telescopic system
Figure 5. Adjusting the telescopic system.
To avoid play or stalling of the telescopic system after installing the rear base
tilt unit, both sliding parts can be readjusted. To remove play from the system
set screws [12] should be tightened using Allen key [6]. To avoid stalling, loosen
the set screws [12]. Note these adjustments come very close, do not over
tighten the set screws!
To complete the full base tilt kit, the bottom tilt unit (See fig.6. [14]) can be fit
to the Actus rail using the Arca compatible clamp. The bottom of the bottom tilt
unit is fit with an Arca compatible dove tail to fit any Arca compatible tripod
head like, for example, the Cambo PCH gear head.
