Chapter 7: Operation
Spectrum Management
Page 7-29
Spectrum Management
This section describes how to use the Spectrum Management pages to monitor the radio
spectrum usage of the PTP 670 link.
Spectrum Expert and Spectrum Management pages
There are two alternative web pages providing access the spectrum monitoring information:
•
the Spectrum Expert page, and
•
the Spectrum Management page.
The Spectrum Expert page is the default as it is effectively a superset of the Spectrum
Management page. However, it makes use of features only available in the most recent web
browsers. It also requires additional data to be sent across the wireless link, thus reducing the
capacity available for other types of traffic when the page is displayed.
Note
Internet Explorer versions up to and including IE8 do not support the HTTP features
used in the Spectrum Expert page.
For these reasons, the PTP 670 Series may be configured to use the Spectrum Management
page instead of the Spectrum Expert page. This is done by checking the Disable Spectrum
Expert (use old Spectrum Management) control in the Web Property attribute under the
Management > Web > Web Properties menu, as shown in
Figure 218 Disabling Spectrum Management page advanced web page
