![Cambium PTP 450 Configuration And User'S Manual Download Page 201](http://html1.mh-extra.com/html/cambium/ptp-450/ptp-450_configuration-and-users-manual_3577514201.webp)
PTP 450 Configuration and User Guide
Equipment specifications
6-2
pmp-0815 (August 2015)
Equipment specifications
This section contains specifications of the BHM, BHS, associated supplies required for
PTP 450 installations.
BH specifications
The PTP 450 BH conforms to the specifications listed in
. These specifications
apply to all PTP 450 product variants (except where noted).
Table 54 BHM physical specifications
Category
Specification
Product
Model
Number
3.5 GHz
C035045B001A, C035045B002A
3.6 GHz
C036045B001A, C036045B002A
5 GHz
C054045B001A, C054045B002A
Spectrum
Channel
Spacing
5 MHz
7 MHz
10 MHz
20 MHz
channel
bandwidth
Configurable on 2.5 MHz increments ( 5 GHz)
Configurable on 1 kHz increments (3.5 GHz, 3.6 GHz)
7 MHz Channel bandwidth configurable for 3.5 GHz and
3.65 GHz band only.
Frequency
Range
3.5 GHz
3300 – 3600 MHz (dependent upon Region Code setting)
3.6 GHz
3550 – 3800 MHz (dependent upon Region Code setting)
5 GHz
5470 – 5875 MHz (dependent upon Region Code setting)
Channel Width
5 MHz (3.5 GHz, 3.6 GHz and 5.8 GHz only),
7 MHz (3.5 GHz and 3.6 GHz)
10 MHz or
20 MHz
OFDM Subcarriers
512 FFT
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer
2x2 MIMO OFDM
Ethernet Interface
10/100BaseT, half/full duplex, rate auto negotiated (802.3
compliant)