Task 8: Configuring syslog
PTP 450 Configuration and User
pmp-0815 (August 2015)
3-73
Task 8: Configuring syslog
The Syslog functionalities are explained in
Table 32
Syslog functionalities
Syslog
Description
Timestamp
All syslog messages captured from the radio have a timestamp.
Configuration Changes
This includes any device setting that has changed and includes
the old or new parameter value, including the device reboots.
User Login and Logout
Syslog records each user login and logout, with username.
Add or Delete of user
accounts through GUI
and SNMP
Syslog captures any user accounts that are added or deleted.
Spectrum Analysis
Syslog records a message every time Spectrum Analysis runs.
Since the BHM must be set to a BHS for Spectrum Analysis,
syslog messages is not be reported from the radio until the scan
is done and the radio mode is switched back to BHM.
Link Test
Syslog records a message every time a Link Test is run.
Clear Statistics
Syslog sends a message when Statistics are cleared. This is
done individually for each statistics page that is cleared.
BHS Connect or
Disconnect
Syslog records a message when a BHS connects or disconnects.
Reboot
watchdog
reset: indicates for system forced reboots.
User initiated Reset
: indicates ser initiated reboots.
