Cambium PTP 450 series, User Manual

Page: 131 / 180

PMP 450 Configuration and User Guide Glossary
ptp-450 (July 2014)
4-111
Equipment specifications
This section contains specifications of the BHM, BHS, associated supplies required for PTP 450
installations.
BHM specifications
The PTP 450 BHM conforms to the specifications listed in Table 49 . These specifications apply to all PTP
450 product variants (except where noted).
Table 49 BHM physical specifications
Category Specification
Product
Model
Number
3.5 GHz C035045A001A, C035045A003A
3.6 GHz C036045A001A, C036045A003A
5 GHz C054045A001A, C054045A002A, C054045A003A
Spectrum
Channel
Spacing
5 MHz
10 MHz
20 MHz
channel
bandwidth
Configurable on 2.5 MHz increments ( 5 GHz)
Configurable on 50 kHz increments (3.5 GHz, 3.6 GHz)
Frequency
Range
3.5 GHz 3300 – 3600 MHz (dependent upon Region Code setting)
3.6 GHz 3550 – 3800 MHz (dependent upon Region Code setting)
5 GHz 5470 – 5875 MHz (dependent upon Region Code setting)
Channel Width 5 MHz (3.5 GHz, 3.6 GHz and 5.8 GHz only), 10 MHz or 20 MHz
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, SNMP, HTTP, FTP, RADIUS
Network Management HTTP, FTP, SNMP v2c, Syslog