background image

Notes

A note means that there is a possibility of an undesirable situation or provides additional information to help the reader understand a topic or 
concept. A note has the following format: 

Caring for the environment

The following information describes national or regional requirements for the disposal of Cambium Networks supplied equipment and for the 
approved disposal of surplus packaging.

In EU countries

The following information is provided to enable regulatory compliance with the European Union (EU) directives identified and any amendments 
made to these directives when using Cambium Networks equipment in EU countries.

Disposal of Cambium Networks equipment

European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE)

Do not dispose of Cambium Networks equipment in landfill sites. For disposal instructions, refer to 

http://www.cambiumnetworks.com/support/

weee-compliance

.

Disposal of surplus packaging

Do not dispose of surplus packaging in landfill sites. In the EU, it is the individual recipient’s responsibility to ensure that packaging materials are 
collected and recycled according to the requirements of EU environmental law.

In non-EU countries

In non-EU countries, dispose of Cambium Networks equipment and all surplus packaging in accordance with national and regional regulations.

Part Number: 812-0085-014 Rev C  November 5, 2019 

Note text. 

Summary of Contents for XIRRUS XD2-240











Reviews: