Chapter 20: Maintenance
PoE Injector Pin-outs and LEDs – Standard PoE
phn-3963_008v000
Page 20-9
Data Port
Table 188: PoE Injector RJ-45 Data Port Supporting 10/100/1000Base-T
Pin no.
Description
1
BI_DA+ (Bi-directional pair +A)
2
BI_DA- (Bi-directional pair -A)
3
BI_DB+ (Bi-directional pair +B)
4
BI_DC+ (Bi-directional pair +C)
5
BI_DC- (Bi-directional pair -C)
6
BI_DB- (Bi-directional pair -B)
7
BI_DD+ (Bi-directional pair +D)
8
BI_DD- (Bi-directional pair -D)
DC
One or two DC ports, depending on the PoE Injector model:
Two models of the PoE Injector are available:
•
PoE_Inj_AO_2DC_24V_48V
– Includes two DC power ports with power input ranges of ±(18-60)V each.
•
PoE_Inj_AO
– Includes one DC power port (DC Power Port #1), with a power input range of ±(40-60)V.
These ports are UL-60950 compliant, with a 2-pin connector.
PoE Injector LEDs – Standard PoE
•
PWR1 (Bi-color LED)
o
Green
– Power available on PWR1 DC input
o
Off
– No power is available on PWR1 DC input.
•
PWR2 (Bi-color LED)
o
Green
– Power available on PWR2 DC input,
o
Off
– No power is available on PWR2 DC input.
•
PoE (Tri -color LED)
o
Orange
– No load is detected
o
Green
– Providing in-line power
o
Blinking Red
– Invalid/over-load
o
Off
– no power to the
injector unit.
Radio LED
The Radio LED indicates the status of the radio link:
•
Off
– The radio is off.