Chapter 3: Product Hardware Description
Antenna Connection
phn-3972 004v000
Page 3-10
Antenna Connection
PTP 820S can be mounted directly for all frequencies (6-38 GHz) using the following antenna types
(for integrated antennas, specific antennas part numbers are required):
•
CommScope: VHLP series
•
Radiowaves: HP series
•
Cambium: CNT series
For remote mount installations, the following Flexible Waveguide flanges should be used
(millimetric). The same antenna type (integrated) as indicated above can be used (recommended).
Other antenna types using the flanges listed in the table below may also be used.
Table 9 Antenna list
Frequency
Circ. WG
Diameter
Rect. WG
Flange
Des.
Radio Side
(Remote)
Flange
Des.
Flex WG
Side A
Flange
Des.
Flex WG
Side B
Flange
Des.
Antenna
(Remote)
Flange
Des.
Band
Range
(GHz)
6(L/U) GHz
5.8-7.1
31.8 mm
WR137
UDR70
PDR70
PDR70
UDR70
7/8 GHz
7.1-8.5
26 mm
WR112
UBR84
PBR84
PBR84
UBR84
10/11 GHz
10.0-11.7
18 mm
WR90
UBR100
PBR100
PBR100
UBR100
13 GHz
12.7-13.3
15 mm
WR75
UBR120
PBR120
PBR120
UBR120
15 GHz
14.5-15.4
13.5 mm
WR62
UBR140
PBR140
PBR140
UBR140
18 GHz
17.7-19.7
10.5 mm
WR42
UBR220
PBR220
PBR220
UBR220
23 GHz
21.2-23.6
9 mm
26 GHz
24.5-26.6
8 mm
28-31 GHz
27.3-29.5
7 mm
WR28
UBR320
PBR320
PBR320
UBR320
32 GHz
31.8-33.4
6.5 mm
38 GHz
37.0-40.0
5.5 mm
If a different antenna type (CPR flange) is used, a flange adaptor is required. Please contact your
Cambium Networks representative for details.
Note
Appropriate lubricant or grease can be applied to the screws that connect the PTP 820S
to the antenna interface.
