Chapter 8: Acceptance and Commissioning Procedures
Site Acceptance Procedure
phn-3972 004v000
Page 8-23
Site Acceptance Procedure
The purpose of the following procedures is to verify that all installation requirements were noted
and checked. Following this procedure will ensure proper, long-lasting, and safe operation of the
product.
The checklist below summarizes the installation requirements of the site.
SITE ACCEPTANCE CHECKLIST
1. SITE INFORMATION
Customer:
Radio model:
Site name:
Site code:
Radio link code:
Site address:
2. ANTENNA MOUNTING
Antenna mount type:
Mount is of sufficient height to clear local
obstructions
OK
Mount is safely positioned to not cause a safety
hazard
OK
Mount is secure and perpendicular
OK
Mount is grounded as per site specifications
OK
All steelwork is Galvanized or Stainless Steel as
appropriate
OK
3. ANTENNA
Antenna type (model and size):
Antenna is securely fixed to mount
OK
Antenna is grounded as per site specifications
OK
Antenna sway braces are installed correctly (where
applicable)
OK
Antenna Radome is securely fitted (where
applicable)
OK
Water drain plugs are fitted and removed, as
appropriate
OK
