Chapter 4: Cable Installation and Grounding
Cable Grounding
phn-3972 004v000
Page 4-3
Cable Grounding
Cables must be grounded as follows:
•
Connecting an Optical Fiber Cable and SFP
on page 4-20), no grounding is
required.
•
For DC power cables (see
, no grounding is
required.
•
For Ethernet cables, the shielded Ethernetcable (SF/UTP construction) must be grounded to
the antenna tower at the top (next to the PTP 820 unit) and the indoor cabinet and every 50m
using the Ethernet Cable Grounding Kit N000082L017A.
Figure 7 Grounding cable
To Connect the Grounding kit
Table 10 Cable Grounding Kit.
Marketing P/N
Description
CAT5E gnd Kit
High Speed GND Kit for CAT5E SF/UTP 5.9-7.1mm outdoor
cable.
Procedure
1 Strip the Cable jacket.
