Chapter 2: Getting Started
Configuring the Radio Parameters
phn-3963_004v000
Page 2-20
Figure 18 Radio Parameters Page Per Carrier – PTP 820C
3.
Set the radio frequency in the Frequency control (Local) section:
i.
In the TX Frequency (MHz) field, set the transmission radio frequency in MHz.
ii.
In the RX Frequency (MHz) field, set the received radio frequency in MHz.
iii.
Click Apply. The system automatically calculates and displays the frequency separation in
the TX to RX frequency separation (MHz) field, based on the configured TX and RX
frequencies.
iv.
Optionally, select Set also remote unit to apply the frequency settings to the remote unit as
well as the local unit.
