Chapter 8: Ethernet Protocols
Configuring LLDP
phn-3963_004v000
Page 8-89
Figure 186 LLDP Management TLV Configuration Page
lists and describes the status parameters in the LLDP Management TLV Configuration
page.
Table 45 LLDP Management TLV Parameters
Parameter
Definition
Interface Location
Identifies the port.
Destination Address
Defines the MAC address associated with the port for purposes
of LLDP transmissions.
Management Address
The unit's IP address.
Address Subtype
Defines the type of the management address identifier
encoding used for the Management Address.
Tx Enable
Indicates whether the unit's Management Address is
transmitted with LLDPDUs. In this release, the Management
Address is always sent.
Displaying Peer Unit’s Management Parameters
To display LLDP management information about the unit's nearest neighbor (peer):
1.
Select Ethernet > Protocols > LLDP > Advanced > Remote System > Management. The LLDP
Remote System Management page opens.
