Cambium Networks PTP 820C User Manual Download Page 276

Page: 276 / 672

Chapter 8: Ethernet Protocols

Configuring LLDP

phn-3963_004v000

Page 8-83

Figure 181 LLDP Remote System Management Page

Table 41

describes the LLDP remote system management parameters. These parameters are read-

only.

Table 41 LLDP Remote System Management Parameters

Parameter

Definition

Local Interface
Location

The location of the local interface.

Management Address

The octet string used to identify the management address
component associated with the remote system.

Address Sub Type

The type of management address identifier encoding used in
the associated LLDP Agent Remote Management Address.

Time Mark

The time the entry was created.

Configuring the General LLDP Parameters

This section explains how to define the general LLDP parameters for the unit. For instructions on
defining port-specific parameters, see

Configuring the LLDP Port Parameters

Note

The management IP address advertised by the local element depends on the IP
protocol (IPv4 or IPv6) configured for the unit. See

Defining the IP Protocol Version for

Initiating Communications

To display and configure the general LLDP parameters for the unit:
1.

Select Ethernet > Protocols > LLDP > Advanced > Configuration > Parameters. The LLDP
Configuration Parameters page opens.

Summary of Contents for PTP 820C

































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PTP 820C

Reviews:

Brands by name

Popular brands

Cambium Networks PTP 820C, User Manual

Search results

Summary of Contents for PTP 820C

Reviews:

Brands by name

Popular brands