Home
/
Cambium Networks
/
PTP 820C
/
User Manual

Cambium Networks PTP 820C, User Manual, Page: 252 / 672

Share

Page: 252 / 672

Cambium Networks PTP 820C User Manual Download Page 252

Chapter 7: Quality of Service (QoS)

Configuring WRED

phn-3963_004v000

Page 7-59

Assigning WRED Profiles to Queues

To assign a WRED profile to a queue:

1.

Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens (

2.

Select an interface in the Ethernet Logical Port Configuration table and click WRED. The WRED
page opens.

Figure 162 Logical Interfaces – WRED Page

3.

In the Show Service bundle ID field, select 1.

Note: Service Bundles are bundles of queues, grouped together in order to configure common
egress characteristics for specific services. In the current release, only Service Bundle 1 is
supported.

4.

Select a CoS Queue ID and click Edit. The Logical Interfaces – WRED – Edit page opens.

Figure 163: Logical Interfaces – WRED - Edit Page

1.

In the Profile ID field, select the WRED profile you want to assign to the selected queue.

2.

Click Apply, then Close.

«
...
250
251
252
253
254
...
»

Summary of Contents for PTP 820C

































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments