
Chapter 20: Ethernet Protocols (CLI)
Configuring MSTP (CLI)
phn-3965_006v002
Page 20-17
Parameter
Input Type
Permitted Values
Description
sd-handling
Variable
ignored
same-as-SF
ignored
–
Signal Degrade (SD) failures are
ignored in MSTP.
same-as-SF
–
MSTP handles SD failures
the same as Signal Failure, i.e., an SD failure
triggers a topology change.
Setting the Configuration ID (CLI)
The configuration ID attributes include the Configuration Name and the Revision Level. These attributes are part of
the Bridge Configuration Identifier.
To set the configuration ID attributes, enter the following command in root view:
root> ethernet mstp set configuration-name <configuration-name> revision-
level <revision-level>
To display the configuration ID attributes, enter the following command in root view:
root> ethernet mstp show-config-id
Table 268
MSTP Configuration ID CLI Parameters
Parameter
Input Type
Permitted Values
Description
configuration-
name
Text String
The IEEE 802.1Q Configuration Name. The
Configuration Name is part of the bridge
configuration Identifier.
revision-level
Number
0-65535
The IEEE 802.1Q Revision Level. The
Revision Level is part of the bridge
configuration Identifier.
Mapping Services to MSTIs (CLI)
By default, all Ethernet services are assigned to MSTI 0 (CIST). You can map Ethernet services to other MSTIs.
Note
All mapping of Ethernet services to MSTP instances (MSTIs) should be performed
before
enabling
MSTP.
To assign a service to another MSTI, enter the following command in root view:
root> ethernet generalcfg instance-to-service-mapping set service sid
<sid> instance-id <instance-id>
Summary of Contents for PTP 820 Series
