Cambium Networks PTP 820 Series, User Manual

Page: 845 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-26
Displaying Service Point Attributes (CLI)
To display a service point’s attributes, go to service view for the service to which the service point belongs and
enter the following command:
service[SID]>sp service-point-info show spid <sp-id>
Table 196 Display Service Point Attributes CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and MP services.
1-30 for MNG services.
The Service Point ID.
The following command displays the attributes of Service Point 1 in Service 37:
service[37]>sp service-point-info show spid 1
Deleting a Service Point (CLI)
You can only delete a service point if no VLAN bundles are attached to the service point. This is only relevant if the
interface type of the service point is bundle-c-tag or bundle-s-tag. For more information, refer to
Attaching a VLAN
Bundle to a Service Point (CLI) .
To delete a service point from a service, go to service view for the service and enter the following command:
service[SID]>sp delete spid <sp-id>
The following command deletes Service Point 10 from Service 37:
service[37]>sp delete spid 10